– 128 – NWA-008845-001 Rev.5.0
32ch1002.fm
BACKGROUND MUSIC
PROGRAMMING
DESCRIPTION DATA
Assign BGM Interface trunks (COT card/TNT
card) to the required LEN.
NOTE: The TNT trunk number must be as-
signed to the first LEN (Level 0) and
the third LEN (Level 2) of each LT
slot.
(1)
(2)
000-763: LEN
D000-D255: COT/TNT Trunk No.
Assign BGM Interface trunks (COT card/TNT
card) to the required LEN.
[Series 3200 R6.2 software required]
NOTE: The TNT trunk number must be as-
signed to the first LEN (Level 0) and
the third LEN (Level 2) of each LT
slot.
(1)
(2)
XX ZZZ: LEN
XX : 00-59: FP No.
ZZZ: 000-127: Port No.
D000-D255: COT/TNT Trunk No.
Assign Service Restriction Class A to the
required D
term
s.
•
(1)
(2)
Y=02
X-XXXXXXXX: My Line No.
XX ZZ
XX: 00-15 : Service Restriction Class A
Allow Background Music on D
term
in Service
Restriction Class A assigned by CM12 Y=02.
•
(1)
(2)
Y=32
00-15: Service Restriction Class A as-
signed by CM12 Y=02
1 : Allow
Assign the access code for this feature. •
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access code (66)
A039: BGM on D
term
Assign a trunk route number to the BGM Inter-
face trunk (COT card/TNT card).
•
(1)
(2)
Y=00
000-255: Trunk No.
00-63: Trunk Route No.
Assign the BGM interface to each trunk route. •
(1)
(2)
Y=00
00-63: Trunk Route No.
05: Interface with BGM Tone Source
Assign a BGM program number to each trunk
number connected to the BGM source.
•
(1)
(2)
Y=4
00-09: BGM program No. 0-9
D000-D255: Trunk No. connected to BGM
Source
START
CM10
CM14
CM12
CM15
CM20
CM30
CM35
CM48
INITIAL
END
BACKGROUND MUSIC
To Next Page
Loading...