– 815 – NWA-008845-001 Rev.5.0
32ch2001.fm
MESSAGE REGISTRATION
PROGRAMMING
The SMDR is used to provide Message Registration information to a call accounting system.
Refer to STATION MESSAGE DETAIL RECORDING (SMDR) Page 615
To provide Message Registration on PMS:
DESCRIPTION DATA
Specify PN-AP00-B/PN-AP00-D with MRCA
program as the destination to send an MP call
information, if PMS with AP00 on RS-232C
(PN-AP00-B/PN-AP00-D with MRCA pro-
gram) is provided.
•
(1)
(2)
Y=01
03: Destination to send an MP call informa-
tion
2: PN-AP00-B/PN-AP00-D with MRCA
program
Specify PN-AP00-B with AP00 program as
the destination to send an MP call information,
if PMS with AP00 on RS-232C (PN-AP00-B
with AP00 program) is provided.
•
(1)
(2)
Y=01
03: Destination to send an MP call informa-
tion
7 : PN-AP00-B with AP00 program
Specify PMS via LAN port as the destination
to send a Built-in SMDR call information, if
PMS on IP is provided.
•
(1)
(2)
Y=01
05: Destination to send a Built-in SMDR
call information
1: PMS via LAN port
Assign the Pseudo-Answer signal function
when the answer signal (Battery Reversal) has
not been detected within the time assigned by
CM41 Y=0>03 after making an outgoing trunk
call.
NOTE: This data is effective when CM35
Y=04 is set to “1”.
(1)
(2)
123
0: Not sent
1: To send
Provide SMDR service for outgoing calls to re-
quired stations.
•
(1)
(2)
Y=06
X-XXXXXX: Station No.
1: To provide
START
CM04
CM08
CM13
A
JULY/01/2006
HOTEL SYSTEM PROGRAMMING
MESSAGE REGISTRATION
To Next Page
Loading...