– 509 – NWA-008845-001 Rev.5.0
32ch1008.fm
DESCRIPTION DATA
Provide the system with Day/Night Mode
Change by an NT key on Attendant Position.
(1)
(2)
244: Terminating system change
0: Available
(1)
(2)
245: Trunk Restriction Class change
0: Available
Assign Service Restriction Class B for Day/
Night Mode Change by station dialing to At-
tendant Position.
•
(1)
(2)
Y=02
X-XXXXXXXX: My Line No.
XX ZZ
ZZ: 00-15 : Service Restriction Class B
Allow Day/Night Mode Change by station di-
aling in Service Restriction Class B assigned
by CM12 Y=02.
•
(1)
(2)
Y=60
00-15: Service Restriction Class B as-
signed by CM12 Y=02
1 : Allow
Assign the Loop keys to each D
term
, and assign
the function keys required for the Attendant
Position to the D
term
.
•
(1)
(2)
Y=00
My Line No. + + Key No.
AA01-AA75 : Loop Key
AB00-AB99 : ICI/OPR Key
F1020 : Release Key
F1080 : Do Not Disturb Override
F0300 : Operator Call Key
F1300-F1363: Night Key
Specify Line Preselection on a D
term
after
pressing the desired LINE/TRUNK key.
NOTE: To provide a Trunk Name/Station
Name, refer to ALPHANUMERIC
DISPLAY. Page 25
(1)
(2)
199
0: Not required
1: Required
B
CM08
CM12
CM15
CM90
,
CM08
END
JANUARY/20/2006
MULTILINE TERMINAL ATTENDANT POSITION