– 28 – NWA-008845-001 Rev.5.0
32ch1001.fm
To display the Caller ID for each D
term
before answer when an incoming call is terminated to a sub line,
do the following programming.
[Series 3600 software required]
DESCRIPTION DATA
Provide Caller ID Display for each tenant
when an incoming call is terminated to a sub
line of D
term
.
•
(1)
(2)
Y=43
00-63: Tenant No.
0: To provide
1: Not provided
Specify the My Line number of D
term
that dis-
plays the caller ID.
NOTE: The number of stations that can dis-
play the caller ID on LCD is maxi-
mum 8 per tenant.
Assign the allocation number to the
stations that displays the caller ID.
•
(1)
(2)
Y=30
XX YY
XX: 00-63: Tenant No.
YY: 00-07: Allocation No.
X-XXXXXXXX: My Line No.
Provide Caller ID Display for the my line as-
signed by CM57 Y=30.
•
(1)
(2)
Y=54
X-XXXXXXXX: My Line No.
0: To provide
1: Not provided
Provide Caller ID Display for the stations of
SLT/sub line of D
term
/Virtual line/Virtual sta-
tion for PS that are accommodated to the D
term
multiline as a sub line.
NOTE: When terminating the call to the sta-
tions of SLT/sub line of D
term
/Virtu-
al line/Virtual station for PS, the
caller ID is displayed on the LCD of
the D
term
assigned by CM57 Y=30.
•
(1)
(2)
Y=55
X-XXXXXXXX: Station No.
0: To provide
1: Not provided
START
CM65
CM57
CM13
END
JULY/01/2006
ALPHANUMERIC DISPLAY
To Next Page
Loading...