– 27 – NWA-008845-001 Rev.5.0
32ch1001.fm
To display the Caller ID for each D
term
before answer when an incoming call is terminated with TAS, do
the following programming.
[Series 3600 software required]
NOTE: This programming is effective only when CM76 Y=01-04 is set to D03 (Trunk Line [Direct] Ap-
pearance + TAS)/D13 (TAS), or CM30 Y=02/04/40/41 is set to 03 (Trunk Line [Direct] Appear-
ance + TAS)/13 (TAS).
DESCRIPTION DATA
Provide Caller ID Display for each tenant
when an incoming call is terminated to a D
term
with TAS.
•
(1)
(2)
Y=42
00-63: Tenant No.
0: To provide
1: Not provided
Specify the My Line number of D
term
that dis-
plays the caller ID.
NOTE: The number of stations that can dis-
play the caller ID on LCD is maxi-
mum 8 per tenant.
Set the allocation number to the sta-
tions that displays the caller ID.
•
(1)
(2)
Y=30
XX YY
XX: 00-63: Tenant No.
YY: 00-07: Allocation No.
X-XXXXXXXX: My Line No.
Provide Caller ID Display for the my line as-
signed by CM57 Y=30.
•
(1)
(2)
Y=54
X-XXXXXXXX: My Line No.
0: To provide
1: Not provided
Assign the TAS Answer keys to the D
term
.•
(1)
(2)
Y=00
My Line No. + + Key No.
F40XX
XX: 00-63: Tenant No. assigned by CM57
Y=30
START
CM65
CM57
CM13
CM90
,
END
JULY/01/2006
ALPHANUMERIC DISPLAY
To Next Page
Loading...