Philips Sopho 2000 IPS - Page 170

– 152 – NWA-008845-001 Rev.5.0
32ch1003.fm
DESCRIPTION DATA
Select the feature available in each tenant
when an internal call and a Tie Line/C.O.
incoming call are terminated.
•
•
•
(1)
(2)
Y=23 Internal Call or ATT assisted Call
Y=24 C.O. Incoming Call
Y=25 Tie Line Incoming Call
00-63: Tenant No.
0 : Split Call Forwarding
1 : Call Forwarding
Select the feature available in each tenant
when an internal call via CCIS and a Tie Line/
C.O. incoming call via CCIS are terminated.
NOTE: CM65 Y=37/38/39 is effective only
when CM08>608 2nd data=0.
•
•
•
(1)
(2)
Y=37 Internal Call or ATT assisted Call via
CCIS
Y=38 C.O. Incoming Call via CCIS
Y=39 Tie Line Incoming Call via CCIS
00-63: Tenant No.
0 : Split Call Forwarding
1 : Call Forwarding
Assign the destination of Split Call Forward-
ing. (See NOTE in next page.)
(1)
(2)
XX Y
XX: 00-63: Tenant No.
Y : 0-7: Block No.
X-XX + + YY···Y
X-XX : Trunk Access Code (1-2 digits)
YY···Y: Called No.
(Maximum 26 digits)
X-XXXXXXXX: Station No. (1-8 digits)
Select the Dial Tone on setting Split Call
Forwarding-All Calls.
•
(1)
(2)
Y=2
13: Dial Tone on setting Split Call Forward-
ing-All Calls
0 : Special Dial Tone (Stutter Dial Tone)
1: Dial Tone
B
CM65
CM78
,
CM48
END
CALL FORWARDING
SPLIT CALL FORWARDING-ALL CALLS