Philips Sopho 2000 IPS - Page 228

– 210 – NWA-008845-001 Rev.5.0
32ch1004.fm
< Data Programming >
COMMAND 1st DATA 2nd DATA REMARKS
CM35 Y=174 00 0 Provide the calling number development with the
Development Pattern 0 for trunk route number 00.
CM2A Y=50 1234 020 Assign the Development Block number 020 for the
calling party number 1234.
CM2A Y=50 2345 021 Assign the Development Block number 021 for the
calling party number 2345.
CM76 Y=01 020 D13 Assign TAS in Day Mode to the Development Block
number 020.
CM76 Y=01 021 D04 Assign Direct-In Termination in Day Mode to the
Development Block number 021.
CM76 Y=09 020 01 Assign the station tenant number 01 to Development
Block number 020.
CM76 Y=05 020 01 Assign the trunk tenant number 01 to Development
Block number 020.
CID CALL ROUTING