Philips Sopho 2000 IPS - Page 230

– 212 – NWA-008845-001 Rev.5.0
32ch1004.fm
To assign the Trunk Restriction Class:
DESCRIPTION DATA
Assign the Trunk Restriction Class to each
station.
•
(1)
(2)
Y=01 Trunk Restriction Class
X-XXXXXXXX: Station No.
X Z
X: 1 -8: Trunk Restriction Class in Day
Mode
Z: 1 -8: Trunk Restriction Class in Night
Mode
1: Unrestricted (RCA)
2: Non-Restricted 1 (RCB)
3: Non-Restricted 2 (RCC)
4: Semi-Restricted 1 (RCD)
5: Semi-Restricted 2 (RCE)
6: Restricted 1 (RCF)
7: Restricted 2 (RCG)
8: Fully-Restricted (RCH)
Set the Outgoing/Incoming Trunk Route
Restriction Data by Trunk Restriction
Classes (RCA-RCH).
•
•
(1)
(2)
Y=51-58 Outgoing Trunk Restriction
Data
Y=61-68 Incoming Trunk Restriction
Data
00-63: Trunk Route No.
0 : Restricted
1 : Allow
START
CM12
CM35
END
CLASS OF SERVICE