– 222 – NWA-008845-001 Rev.5.0
32ch1004.fm
To use this feature by using the feature keys assigned on the D
term
:
DESCRIPTION DATA
Assign the feature key for Six/Ten-Party
Conference, on the D
term
of the Conference
leader.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F0A85: 6-party conference
F0A86: 10-party conference
Assign maximum of 6 or 10 Multiple Line
keys on the D
term
of the Conference leader.
•
(1)
(2)
Y=00
My Line No. + + Key No.
X-XXXXXXXX: Multiple Line No.
Specify the Multiple Line number set by
CM90 to be accommodated to D
term
.
•
(1)
(2)
Y=05
X-XXXXXXXX: Multiple Line No.
0: Accommodated
Assign the card number of the Conference
trunk (CFT card) to the required LEN.
NOTE: The CFT card number must be
assigned to the first LEN (Level 0) of
each LT slot.
(1)
(2)
000-763: LEN
ED00-ED03: CFT Card No.
Assign the card number of the Conference
trunk (CFT card) to the required LEN.
[Series 3200 R6.2 software required]
NOTE: The CFT card number must be
assigned to the first LEN (Level 0) of
each LT slot.
(1)
(2)
XX ZZZ: LEN
XX : 00-59: FP No.
ZZZ: 000-127: Port No.
ED00-ED03: CFT Card No.
START
CM90
,
,
CM12
CM10
INITIAL
CM14
INITIAL
END
CONFERENCE (SIX/TEN PARTY)
To Next Page
Loading...