– 244 – NWA-008845-001 Rev.5.0
32ch1004.fm
DESCRIPTION DATA
Assign the number to be dialed to each Memo-
ry Slot number, if required. The numbers to be
called are usually set from individual stations
by their station users.
•
(1)
(2)
Y=0
X YY Z
X : 0-9: 1000-Slot Memory Block No.
YY: 00-99: 10-Slot Memory Block No.
Z : 0-9: Memory Parcel No.
Stored No.:
Outgoing Call Access Code (Maximum 4
digits) + + Stored No. (Maximum 26
digits)
To set a pause into the Stored No., enter
“C” (Fixed Pause=1.5 seconds) or
“D” (Programmable Pause specified by
CM41 Y=0>38) after desired digits.
NONE : No data
Assign the Station Name to be displayed to
each Memory Slot number, by character codes
or character.
•
(1)
(2)
Y=1
X YY Z
X : 0-9: 1000-Slot Memory Block No.
YY: 00-99: 10-Slot Memory Block No.
Z : 0-9: Memory Parcel No.
XX...XX: Station Name Character Code
(Maximum 32 digits, 16 charac-
ters)
NONE : No data
See APPENDIX B:Character Code Table.
Page B2
•
(1)
(2)
Y=2
X YY Z
X : 0-9: 1000-Slot Memory Block No.
YY: 00-99: 10-Slot Memory Block No.
Z : 0-9: Memory Parcel No.
XX...XX: Station Name Character
(Maximum 16 characters)
NONE : No data
D
CM74
,
E
JANUARY/20/2006
CONSECUTIVE SPEED DIALING
To Next Page
Loading...