Philips Sopho 2000 IPS - Page 318

– 300 – NWA-008845-001 Rev.5.0
32ch1006.fm
To assign the destination tenant for Day/Night Mode and Mode A/B, when DID call terminates
(When CM76 Y=01/02/03/04 is set to “D13” (TAS)):
To assign the destination tenant for Day/Night Mode and Mode A/B, when DID call terminates
(When CM76 Y=01/02/03/04 is set to “station number to be terminated”):
DESCRIPTION DATA
Assign the tenant for Day/Night Mode, Mode
A/B per each station number received on DID
call.
•
•
•
•
(1)
(2)
Y=05 Day Mode
Y=06 Night Mode
Y=07 Mode A
Y=08 Mode B
000-999: Number Conversion Block No.
assigned by CM76 Y=00/90
00-63: Trunk Tenant No.
DESCRIPTION DATA
Assign a tenant number to each station as-
signed by CM76 Y=01/02/03/04.
•
(1)
(2)
Y=04
X-XXXXXXXX: Station No. assigned by
CM76 Y=01/02/03/04
00-63: Tenant No.
01 : Tenant No.
Assign the terminating station tenant for each
DID number during Day/Night Mode, Mode
A/B.
•
•
•
•
(1)
(2)
Y=18 Day Mode
Y=19 Night Mode
Y=20 Mode A
Y=21 Mode B
000-999: Number Conversion Block No.
assigned by CM76 Y=00/90
00-63 : Station Tenant No.
NONE : Trunk Tenant
START
CM76
END
START
CM12
CM76
END
DIRECT INWARD DIALING (DID)