CHAPTER 1 BUSINESS FEATURES
– 20 – NWA-008845-001 Rev.5.0
32ch1001.fm
The following features require no programming.
For the following features, refer to the NEAX 2000 IPS manuals mentioned below.
Refer to the System Manual:
Refer to the D
term
Assistant User Guide:
•D
term
Assistant
Refer to the Open Application Interface (OAI) System Manual:
• Open Application Interface (OAI)
Refer to the Q-SIG System Manual:
• Q-SIG Circuit Switched Basic Call-ETSI Version
Refer to the Remote PIM System Manual:
• TDM based Remote PIM
• Alarm Indications
• Attendant Console
– Attendant Called/Calling Number
– Attendant Lamp Check
– Attendant Training Jacks
– Audible Indication Control
– Call Processing Indication
– Time Display
• Attendant Lockout
• Elapsed Call Timer
• Feature Activation from Secondary Extension
• Handsfree Answerback
• Handsfree Dialing and Monitoring
• Non-exclusive Hold
• Night Service
– Day/Night Mode Change by Attendant Console
• Maintenance Administration Terminal (MAT)
– Battery Release Control
– Configuration Report
• Power Failure Transfer
• Proprietary Multiline Terminal
– Called Station Status Display
– Handsfree Unit
– I-Hold/I-Use Indication
– Microphone Control
• Reserve Power
• Resident System Program
• Voice Mail Private Password
• Automatic Program Download for IP Enabled
D
term
/D
term
IP
• Bandwidth Control
• Call Forwarding-Logout (D
term
IP)
•D
term
IP
• FAX over IP
• IP Enabled D
term
• Modem over IP
•SNMP
• VoIP
DECEMBER/02/2005
To Next Page