Philips Sopho 2000 IPS - Page 455

– 437 – NWA-008845-001 Rev.5.0
32ch1007.fm
Programming for Example 2:
STEP1: Assign “9” to the access code of LCR Group 0 in Numbering Plan Group 0.
+ 200 + + 9 + + A126 +
STEP2: Assign Area Code Development Pattern No. 5 to LCR Group 0.
+ 8AA000 + + 0 + + 4005 +
STEP3: Assign Route Pattern Nos. 00 and 01to area codes 214 and 213 respectively.
+ 8A4005 + + 214 + + 0000 +
Route Pattern No. 00
+ 8A4005 + + 213 + + 0001 +
Route Pattern No. 01
STEP4: Specify the order of LCR selection to each Route Pattern.
For Route Pattern 00:
1st: Route 00 (FX)
+ 8A0000 + + 1 + + 000 00 +
LCR Pattern No. 000
2nd: Route 01 (WATS)
+ 8A0000 + + 2 + + 001 01 +
LCR Pattern No. 001
3rd: Route 02 (DDD)
+ 8A0000 + + 3 + + 002 02 +
LCR Pattern No. 002
For Route Pattern 01:
1st: Route 00 (FX)
+ 8A0001 + + 1 + + 003
00 +
LCR Pattern No. 003
2nd: Route 01 (WATS)
+ 8A0001 + + 2 + + 004 01 +
LCR Pattern No. 004
3rd: Route 02 (DDD)
+ 8A0001 + + 3 + + 005
02 +
LCR Pattern No. 005
ST DE DE EXE
ST DE DE EXE
ST DE DE EXE
ST DE DE EXE
ST DE DE EXE
ST DE DE EXE
ST DE DE EXE
ST DE DE EXE
ST DE DE EXE
ST DE DE EXE
LEAST COST ROUTING-3/6 DIGIT