– 448 – NWA-008845-001 Rev.5.0
32ch1008.fm
(2) MCI with AP00
The Application Processor (AP00) is required to make a data link with a customer supplied VMS and
the analog line circuit (LC) to interface with the VMS.
• AP00 card:
The AP00 stores call information for stations, and provides the RS-232C ports for a VMS.
The AP00 keeps supervising the status of the VMS. If the VMS is not ready for information
receiving (Busy Status), the AP00 temporarily stores the call information into its internal memory.
The AP00 stores call information of a maximum of 16 calls.
• LC card:
The LC is used for the VMS stations. The UCD or Station Hunting feature is usually provided with
the VMS stations.
MESSAGE CENTER INTERFACE (MCI)
SYSTEM OUTLINE
To Next Page
Loading...