– 494 – NWA-008845-001 Rev.5.0
32ch1008.fm
DESCRIPTION DATA
Assign the data for interpreting the digits re-
ceived.
•
•
•
•
(1)
(2)
Y=01 Day Mode
Y=02 Night Mode
Y=03 Mode A
Y=04 Mode B
000-999: Number Conversion Block No.
assigned by CM76 Y=00/90
NONE : No data
For a mobile phone of Mobility Access, allow
tandem connection between the incoming
trunk route and the outgoing trunk route.
•
(1)
(2)
Y=0
XX ZZ
XX: 00-63: Incoming Trunk Route
ZZ : 00-63: Outgoing Trunk Route
0: Allow
Specify the destination of DID call transfer to
an attendant by CM51 Y=00/03/06 in system.
(1)
(2)
241
0: Tenant of called station
Assign the destination of DID call transferred
when the station is busy/unassigned/no an-
swer.
NOTE: The 1st data is set to the tenant No.
of called station.
•
•
•
(1)
(2)
Y=00 No Answer
Y=03 Busy
Y=06 Unassigned
00-63: Tenant No.
Destination:
X-XXXXXXXX: Station No.
E000: Attendant Console
Provide release of ISDN trunk when receiving
the ISDN DISCONNECT message with
Progress Description=08 from ISDN (effective
for an outgoing call to ISDN).
•
(1)
(2)
Y=158
00-63: Trunk Route No.
0: To provide
Provide release of ISDN trunk when receiving
the ISDN DISCONNECT message with
Progress Description=08 from ISDN (effective
for an incoming call to ISDN).
•
(1)
(2)
Y=208
00-63: Trunk Route No.
1: To provide
B
CM76
CM36
CM08
CM51
CM35
C
JANUARY/20/2006
MOBILITY ACCESS