Philips Sopho 2000 IPS - Page 523

– 505 – NWA-008845-001 Rev.5.0
32ch1008.fm
To provide Mobility Access hooking, do the following programming.
[For EU]
[Series 3700 R12.2 software required]
DESCRIPTION DATA
Specify the output message which is sent from
PBX to ISDN network when the 2nd line is re-
leased by Mobility Access hooking.
(1)
(2)
676
0 : As per CM08>677
1 : CALL PROC+DISC
Specify the output message which is sent from
PBX to ISDN network when the 2nd line is re-
leased by Mobility Access hooking.
NOTE: This data is effective only when the
2nd data of CM08>676 is set to 0.
(1)
(2)
677
0 : CALL PROC+ALERT+DISC
1 : CALL PROC+ALERT+CONNECT+
DISC
START
CM08
END
NOVEMBER/15/2006
MOBILITY ACCESS