– 525 – NWA-008845-001 Rev.5.0
32ch1008.fm
To provide External Hold Tone Source through TNT card:
DESCRIPTION DATA
Assign the TNT card number (External Hold
Tone Source number) to the required LEN.
NOTE 1: The TNT card number must be as-
signed to the first LEN (Level 0) and
the third LEN (Level 2) of each LT
slot.
NOTE 2: The TNT card number must be as-
signed for each tenant. One Exter-
nal Hold Tone Source can be
provided per tenant.
(1)
(2)
000-763: LEN
DA00-DA09: TNT Card No.
Assign the TNT card number (External Hold
Tone Source number) to the required LEN.
[Series 3600 R6.1 software required]
NOTE 1: The TNT card number must be as-
signed to the first LEN (Level 0) and
the third LEN (Level 2) of each LT
slot.
NOTE 2: The TNT card number must be as-
signed for each tenant. One Exter-
nal Hold Tone Source can be
provided per tenant.
(1)
(2)
XX ZZZ: LEN
XX : 00-59: FP No.
ZZZ: 000-127: Port No.
DA00-DA09: TNT Card No.
Define the type of call to be provided with
External Hold Tone.
•
(1)
(2)
Y=0
00: C.O. Line Call
01: Tie Line Call
02: Station
0200: External Hold Tone Source
Specify External Hold Tone Source per each
tenant.
•
(1)
(2)
Y=1
00-63: Tenant No.
00-09: External Hold Tone Source No.
(TNT Card No. DA00-DA09)
Specify which tenant External Hold Tone is
sent from.
(1)
(2)
388
0 : Tenant of held station/trunk
1 : Tenant of holding station
START
CM10
CM14
CM48
INITIAL
CM64
CM08
END
MUSIC ON HOLD
To Next Page
Loading...