– 42 – NWA-008845-001 Rev.5.0
32ch1001.fm
NOTE: A voice message can be sent to incoming C.O. lines during Night Mode.
• Different messages can be programmed on each C.O. line.
• The voice message can be programmed for Day/Night.
• More than one connection can be made to a Digital Announcement Trunk Circuit. Only the
first connection can be assured of hearing the message from the beginning.
• Announcements may be programmed to be repeated from 4 to 120 seconds in four-second in-
crements.
HARDWARE REQUIRED
DAT card or MP card (built-in DAT)
DESCRIPTION DATA
Specify the duration of an Announcement. •
(1)
(2)
Y=0
45
01-30: 4-120 seconds
(4 second increments)
If no data is set, the default setting is 60-64
seconds.
To record, replay, or delete a message, assign
the respective Digital Announcement Trunk
access code.
•
(1)
(2)
Y=0-3 (Numbering Plan Group 0-3)
X-XXXX: Access Code
A100: Record
A101: Replay
A102: Delete
A
CM41
CM20
END
ANNOUNCEMENT SERVICE
To Next Page
Loading...