– 632 – NWA-008845-001 Rev.5.0
32ch1010.fm
For Incoming Call Record, do the following programming.
DESCRIPTION DATA
Provide the SMDR service for incoming calls
to the required stations.
•
(1)
(2)
Y=05
X-XXXXXXXX: Station No.
0: To provide
1: Not provided
Provide the SMDR service for incoming calls
to the required trunk routes.
•
(1)
(2)
Y=49
00-63: Trunk Route No.
0: To provide
1: Not provided
Specify whether the SMDR service is effective
only for incoming calls with Account Code or
not.
(1)
(2)
426: SMDR for incoming call
0 : Effective for all incoming calls
1 : Effective only for incoming calls with
Account Code
Specify whether the ANI/Caller ID is sent to
SMDR.
NOTE 1: When providing incoming calls with
ANI, assign this data in addition to
the programming for AUTOMATIC
NUMBER IDENTIFICATION
(ANI). Page 120
NOTE 2: When this data is assigned to 1,
SMDR service for incoming calls is
not provided even if CM13 Y=05 is
0 (To provide).
(1)
(2)
463: ANI/Caller ID to SMDR
0: To send
1: Not sent
B
CM13
CM35
CM08
C
JULY/01/2006
STATION MESSAGE DETAIL RECORDING (SMDR)
PROGRAMMING
To Next Page