Philips Sopho 2000 IPS - Page 698

– 680 – NWA-008845-001 Rev.5.0
32ch1010.fm
To use the 1000-Slot Memory Block number (0-3) for Station Speed Dialing as the Memory Block for Sys-
tem Speed Dialing, add the following programming.
DESCRIPTION DATA
Specify the 1000-Slot Memory Block number
0-3.
(1)
(2)
112: 1000-Slot Memory Block No. 0
0 : Available
1 : Not available
(1)
(2)
111: 1000-Slot Memory Block No. 1
0 : Available
1 : Not available
(1)
(2)
176: 1000-Slot Memory Block No. 2
0 : Available
1 : Not available
(1)
(2)
110: 1000-Slot Memory Block No. 3
0 : Available
1 : Not available
Assign the Access Code for System Speed Di-
aling.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A152: 1000-Slot Memory Block No. 0
A151: 1000-Slot Memory Block No. 1
A068: 1000-Slot Memory Block No. 2
A150: 1000-Slot Memory Block No. 3
Assign an access key for System Speed Dial-
ing to the D
term
s, as needed.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F0068: System Speed Dialing origination
(1000-Slot Memory Block)
START
CM08
CM20
CM90
,
A
SYSTEM SPEED DIALING