– 684 – NWA-008845-001 Rev.5.0
32ch1010.fm
DESCRIPTION DATA
Assign the abbreviated code to each Memory
Slot number that is assigned the stored number
by CM74 Y=0.
•
(1)
(2)
Y=5
X-XXXXXXXX: Abbreviated Code
X: 0-9
X YY Z
X : 0-9: 1000-Slot Memory Block No.
YY: 00-99: 10-Slot Memory Block No.
Z : 0-9: Memory Parcel No.
NONE : No data
NOTE 1: 4-digit (Fixed) abbreviated code is used for Series 3300 to 3500 software.
1-8-digit abbreviated code is used for Series 3600 software or later.
NOTE 2: Memory area of System Speed Dialing with 1-8-digit abbreviated code is also used as the
memory area of Station Speed Dialing. Do not assign the same Memory Slot number of
System Speed Dialing with 1-8-digit abbreviated code (set by CM74 Y=0) as Memory Slot
number of Station Speed Dialing (set by CM73).
NOTE 3: Set the same number of digits as the digits of abbreviated code assigned by CM42>77 to
the second data.
NOTE 4: When setting the number of digits for abbreviated code to 5-8, the minimum number of the
abbreviated code that can be registered to the memory area is as follows.
• 5-digit abbreviated code: 500
• 6-digit abbreviated code: 333
• 7-digit abbreviated code: 250
• 8-digit abbreviated code: 200
Specify System Speed Dialing security.
(Stored number displays on D
term
for an outgo-
ing call by System Speed Dialing.)
(1)
(2)
043
0: Not displayed
1: To display
Specify Toll Restriction for an outgoing call by
System Speed Dialing, if required.
(1)
(2)
044
0: Not provided
1: To provide
B
CM74
CM08
END
JANUARY/20/2006
SYSTEM SPEED DIALING
To Next Page
Loading...