Philips Sopho 2000 IPS - Page 737

– 719 – NWA-008845-001 Rev.5.0
32ch1011.fm
DESCRIPTION DATA
Assign the Echo Canceller function to each
AMP pattern.
•
(1)
(2)
Y=02
00-14: AMP pattern No. 00-14
0: Through
1: Normal
Assign the Gain Controller of Echo Canceller
to each AMP pattern.
•
(1)
(2)
Y=03
00-14: AMP pattern No. 00-14
0: ON
1: OFF
Select the mode of Tone Disabler on each
AMP pattern.
•
(1)
(2)
Y=04
00-14: AMP pattern No. 00-14
0: G164
1: G165
Specify the detect timing of Tone Disabler on
each AMP pattern.
•
(1)
(2)
Y=05
00-14: AMP pattern No. 00-14
0 : 0 second
1 : 2 seconds
Specify the channels connected to each AMP
pattern.
•
(1)
(2)
Y=06
00-14: AMP pattern No. 00-14
0 : Incoming Route: Tie Line
Outgoing Route: C.O. Line
1 : Incoming Route: C.O. Line
Outgoing Route: Tie Line
Specify the timing of AMP trunk connection
on each AMP pattern.
•
(1)
(2)
Y=07
00-14: AMP pattern No. 00-14
0 : When dialing is finished
1 : When answering
A
CM38
END
TRUNK-TO-TRUNK CONNECTION