– 734 – NWA-008845-001 Rev.5.0
32ch1011.fm
DESCRIPTION DATA
Assign the access code for monitor, if required. •
(1)
(2)
Y=0-3 Number Plan Group 0-3
X-XXXX: Access Code
A033: Monitor
Assign a monitoring function key to the re-
quired D
term
s.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F0033: Monitoring
Specify the action of monitoring station after
the hold/hooking key is pressed in the moni-
tored station or the monitored station becomes
idle.
[Series 3500 software required]
(1)
(2)
560
0 : Keep monitoring
1 : Stop monitoring
When setting the second data of CM08>560 to
0 (keep monitoring), set the music for Internal
Hold Tone that is sent to monitoring station.
NOTE 1: When PN-CP24-D/PN-CP26-B/
PN-CP27-B/PN-CP31-D is used as
MP card, the following tone sources
are not available: “It’s a small
world (2nd data 05)”, “Let it be
(2nd data 07)”, and “If you love me
(2nd data 09)”. “Minuet” will be set
instead of those tone sources.
NOTE 2: This data setting is effective only for
the legacy terminal.
For D
term
IP, this data setting is not
effective. D
term
IP uses the tone
source in IP Adapter (Minuet).
•
(1)
(2)
Y=3
01
00 : Nocturne
01 : Minuet
02 : Fur Elise
03 : The Maiden’s Prayer
04 : When the saints go marching in
05 : It’s a small world
06 : Spring (by four seasons)
07 : Let it be
08 : Ich bin ein Musikante (German
folk song)
09 : If you love me
10 : Amaryllis (French folk song)
NONE : Minuet
Define the type of call to be provided with
Hold Tone on the MP card.
•
(1)
(2)
Y=0
02: Internal Call
1400: Hold Tone Source on MP card
A
CM20
CM90
,
CM08
CM48
END
JULY/01/2006
UNIFORM CALL DISTRIBUTION (UCD)
SILENT MONITOR-UCD
To Next Page
Loading...