– 740 – NWA-008845-001 Rev.5.0
32ch1011.fm
• For Closed Numbering System
DESCRIPTION DATA
Assign an access code for LCR Group 3. •
(1)
(2)
Y=0-3 Numbering Group 0-3
X-XXXX: Access Code
A129: LCR Group 3
Assign an Area Code Development Pattern
number to LCR Group 3.
•
(1)
(2)
Y=A000
3: LCR Group 3
4005-4007: Area Code Development Pat-
tern No. 5-7
Assign a Route Pattern number to each area
code for the Area Code Development Pattern
number assigned by CM8A Y=A000.
•
(1)
(2)
Y=4005-4007 Area Code Development
Pattern No. 5-7
NXX/1NXX: Area Code, Maximum 8 dig-
its
0000-0255: Route Pattern No. 000-255
Assign an area code (station number) for Intra-
Office Terminations, if required.
•
(1)
(2)
Y=4005-4007 Area Code Development
Pattern No. 5-7
X-XXXXXXXX: Area Code (Maximum 8
digits)
8001-8008: 1-8 digits Intra-office station
Specify the order of LCR selection for the
Route Pattern number assigned by CM8A
Y=4005-4007.
•
(1)
(2)
Y=0000-0255 Route Pattern No. 000-255
1-4: Order of LCR Selection
1: 1st
2: 2nd
3: 3rd
4: 4th
XXX ZZ
XXX: 000-255: LCR Pattern No.
ZZ : 00-63: Trunk Route No.
Assign the digits to be deleted when deleting
digits of an area code sent to a distant office.
To delete all digits of an area code:
•
(1)
(2)
Y=5000-5255 LCR Pattern No. 000-255
151: Deletion of all digits of area code
(NXX, 1NXX) assigned by CM8A
Y=4005-4007
0: To delete
START
CM20
CM8A
A
UNIFORM NUMBERING PLAN (UNP)-VOICE AND DATA
To Next Page
Loading...