– 757 – NWA-008845-001 Rev.5.0
32ch2001.fm
Application Processor/Main Processor
• PMS with AP00 on RS-232C
The Application Processor (AP) manages guest or administration room status and stores call informa-
tion on each guest or administrative station. The AP also provides RS-232C interface ports for a Prop-
erty Management System (PMS) terminal, a Station Message Detail Recording (SMDR) terminal and a
Hotel Printer.
• MP built-in PMS on IP
[Series 3400 software required]
The Main Processor (MP) manages guest or administration room status and stores call information on
each guest or administrative station. The MP also provides a LAN interface port for a Property Manage-
ment System (PMS) terminal or a Station Message Detail Recording (SMDR) terminal.
Hotel Console
The DESKCON is programmed as a Hotel Console. The Hotel Console can access Room Cutoff (individ-
ual and group), Automatic Wake Up, Message Waiting, or Do Not Disturb (individual and group) with the
function keys; in addition to the attendant features and functions.
Hotel/Motel Front Desk Terminal
The D
term
can be programmed to function as a Hotel/Motel Front Desk Terminal. This allows setting and
canceling of the following hotel features:
• Automatic Wake Up
• Check In/Check Out NOTE
• Do Not Disturb
• Do Not Disturb-Override
• Message Waiting
• Room Cutoff
• Room Status NOTE
• Hotel/Motel Toll Restriction Change-Guest Station
NOTE: When MP built-in PMS on IP is provided, you can set and cancel these hotel features only from
PMS.
• Check In/Check Out
• Room Status
JUNE/01/2007
HOTEL SYSTEM OUTLINE
To Next Page
Loading...