– 812 – NWA-008845-001 Rev.5.0
32ch2001.fm
• When using PN-AP00-B/PN-AP00-D with MRCA program
[Series 3900 software required]
In addition to the programming of “HOTEL/MOTEL FRONT DESK INSTRUMENT” Page 800,
do the following programming:
DESCRIPTION DATA
If maid ID Code is used, set the data for 281 to
0.
(1)
(2)
281
0 : Available
1 : Not available
Assign the access code for Maid Status. •
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A029
Assign the Room Status key to the Front Desk
Terminal.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F1069: Room Status
Assign Service Restriction Class A to required
guest station.
•
(1)
(2)
Y=02
X-XXXXXX: Station No.
XX ZZ
XX: 00-15 : Service Restriction Class A
Allow Room Status Code setting (Room Cut-
off, Trunk Restriction class change).
•
(1)
(2)
Y=222
00-15: Service Restriction Class A as-
signed by CM12 Y=02
1: Allow
Assign the Charging Station Service Class
number to each station.
•
(1)
(2)
Y=45
X-XXXXXXXX: Station No.
00-15 : Service Class No.
Execute the operation set by CMDD31 is exe-
cuted simultaneously when Room Status Code
is set/changed.
(1)
(2)
XX 18
XX: Service Class No. assigned by CM12
Y=45
1: To execute
START
CM08
CM20
CM90
,
CM12
CM15
CM12
CMDD04
A
JUNE/01/2007
HOTEL SYSTEM PROGRAMMING
MAID STATUS
To Next Page
Loading...