– 80 – NWA-008845-001 Rev.5.0
32ch1002.fm
HARDWARE REQUIRED
DAT card or MP card (built-in DAT)
DESCRIPTION DATA
Specify the replay timer of the message
recorded in the Digital Announcement Trunk.
(1)
(2)
165
0 : Replay at an interval assigned by
CM41 Y=0>47
1 : Replay only once
To record, replay, and delete a message, assign
the Digital Announcement Trunk access
codes, respectively.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A100: Record
A101: Replay
A102: Delete
Specify the unanswered timing of message
replay.
•
(1)
(2)
Y=0
16
01-30: 4-120 seconds
(4 second increments)
If no data is set, the default setting is 32-36 sec-
onds.
Specify the Attendant Delay Announcement
connection timer.
•
(1)
(2)
Y=0
67
01-32: 4-128 seconds
(4 second increments)
If no data is set, the default setting is 8-12 sec-
onds.
Specify the interval time of message replay. •
(1)
(2)
Y=0
47
01-30: 4-120 seconds
(4 second increments)
If no data is set, the default setting is 32-36 sec-
onds.
A
CM08
CM20
CM41
END
ATTENDANT DELAY ANNOUNCEMENT
To Next Page
Loading...