PREVOST LE MIRAGE XLII BUS SHELLS User Manual

1.29 JAKE BRAKE
Remove the slave piston adjusting screw as follows:
1. Loosen slave piston adjusting screw locknut.
2. Remove adjusting screw from housing. See Figure 1-421.
1. Jake Brake Assembly 2. Slave Piston Adjusting Screw
Figure 1-421 Removing Slave Piston Adjusting Screw
All information subject to change without notice.
1-534 From Bulletin 16-60-99 6SE483 9901 Copyright © 1999 DETROIT DIESEL CORPORATION

PREVOST LE MIRAGE XLII BUS SHELLS Specifications

General

Brand	PREVOST
Model	LE MIRAGE XLII BUS SHELLS
Category	Buses
Language	English