PREVOST LE MIRAGE XLII BUS SHELLS User Manual

1.29 JAKE BRAKE
On model 760 only, install the ball check valve as follows:
1. Install the ball check valve and spring. See Figure 1-432.
1. Ball Check Valve 3. Pipe Plug
2. Spring
Figure 1-432 Installation of Ball Check Valve
2. Insert the plug. Torque pipe plug to 11.2 N·m (8.3 lb·ft).
All information subject to change without notice.
1-548 From Bulletin 16-60-99 6SE483 9901 Copyright © 1999 DETROIT DIESEL CORPORATION

PREVOST LE MIRAGE XLII BUS SHELLS Specifications

General

Brand	PREVOST
Model	LE MIRAGE XLII BUS SHELLS
Category	Buses
Language	English