R&S ESR Series User Manual

Receiver Mode
R&S
®
ESR
210User Manual 1175.7068.02 ─ 12
└ Edit Margin....................................................................................................211
└ Edit Value...................................................................................................... 211
└ Insert Value................................................................................................... 211
└ Delete Value..................................................................................................211
└ Save Limit Line..............................................................................................211
Edit.............................................................................................................................. 211
Copy to........................................................................................................................ 211
Delete..........................................................................................................................212
X Offset....................................................................................................................... 212
Y Offset....................................................................................................................... 212
Display Lines...............................................................................................................212
└ Display Line 1 / Display Line 2......................................................................212
└ Frequency Line 1 / Frequency Line 2 .......................................................... 213
└ Time Line 1 / Time Line 2..............................................................................213
└ Tuned Frequency (On Off)............................................................................213
Select Traces to check
Opens a dialog box to activate the selected limit line for a trace. One limit line can be
activated for several traces simultaneously. For details see also Chapter 5.4.3.9, "Acti-
vating/Deactivating a Limit Line", on page 220.
Remote command:
CALCulate<n>:LIMit<k>:TRACe on page 707
CALCulate<n>:LIMit<k>:STATe on page 718
Deselect All
Deactivates the selected limit line for all assigned traces. For details see also Chap-
ter 5.4.3.9, "Activating/Deactivating a Limit Line", on page 220.
Remote command:
CALCulate<n>:LIMit<k>:STATe on page 718
New
Opens the "Edit Limit Line" dialog box and a submenu to define a new limit line. For
details see also Chapter 5.4.3.3, "Limit Lines (Frequency/Time Lines)", on page 214
and Chapter 5.4.3.5, "Selecting a Limit Line", on page 215.
Edit Name ← New
Sets the focus on the "Name" field to enter or change the limit line name. All names
must be compatible with the Windows conventions for file names. The limit line data
are stored under this name. The instrument stores all limit lines with LIM as extension.
Remote command:
CALCulate<n>:LIMit<k>:LOWer:MODE on page 712
Edit Comment ← New
Sets the focus on the "Comment" field to enter or change a comment for the limit line.
The text must not exceed 40 characters.
Remote command:
CALCulate<n>:LIMit<k>:COMMent on page 706
Common Analysis Functions

R&S ESR Series Specifications

General

Brand	R&S
Model	ESR Series
Category	Receiver
Language	English