R&S ESR Series User Manual

System Configuration
R&S
®
ESR
520User Manual 1175.7068.02 ─ 12
The following display settings are available:
●
"Tool Bar State (On/Off)" on page 520
●
"Screen Title (On/Off)" on page 520
●
"Time+Date (On/Off)" on page 520
●
"Time+Date Format (US/DE)" on page 520
●
"Print Logo (On/Off)" on page 521
●
"Annotation (On/Off)" on page 521
●
"Theme Selection" on page 521
●
"Screen Colors" on page 521
●
"Print Colors" on page 522
●
"Display Pwr Save (On/Off)" on page 523
Tool Bar State (On/Off) ← Display Setup
Displays or removes the toolbar above the diagram.
This setting is stored in instrument settings files.
Remote command:
DISPlay:TBAR[STATe] on page 980
Status Bar ← Display Setup
Displays or removes the status bar beneath the diagram.
The status bar indicates the global instrument settings, the instrument status and any
irregularities during measurement or display.
This setting is stored in instrument settings files.
Remote command:
DISPlay:SBAR[:STATe] on page 980
Screen Title (On/Off) ← Display Setup
Activates/deactivates the display of a diagram title (if available) and opens an edit dia-
log box to enter a new title for the active diagram. Max. 20 characters are allowed.
Remote command:
DISPlay[:WINDow<n>]:TEXT[:DATA] on page 983
DISPlay[:WINDow<n>]:TIME on page 983
Time+Date (On/Off) ← Display Setup
Activates/deactivates the display of date and time beneath the diagram.
This setting is stored in instrument settings files.
Remote command:
DISPlay[:WINDow<n>]:TIME on page 983
Time+Date Format (US/DE) ← Display Setup
Switches the time and date display on the screen between US and German (DE).
This setting is stored in instrument settings files.
Remote command:
DISPlay[:WINDow<n>]:TIME:FORMat on page 984
Instrument Setup and Interface Configuration – SETUP Key

R&S ESR Series Specifications

General

Brand	R&S
Model	ESR Series
Category	Receiver
Language	English