R&S FSW Series User Manual

Remote Commands
R&S
®
FSW
1254User Manual 1173.9411.02 ─ 43
To store data permanently, select an external storage location such as a USB memory
device.
For details, see Chapter 5.1.7, "Protecting Data Using the Secure User Mode",
on page 43.
Suffix:
<n>
.
Window
Parameters:
<FileName> String containing the path and name of the target file.
Example:
MMEM:STOR:LIST 'test'
Stores the current list evaluation results in the test.dat file.
Manual operation: See "Saving the Result Summary (Evaluation List) to a File"
on page 267
See "Save Evaluation List" on page 290
MMEMory:STORe<n>:PEAK <FileName>
This command exports the marker peak list to a file.
Secure User Mode
In secure user mode, settings that are stored on the instrument are stored to volatile
memory, which is restricted to 256 MB. Thus, a "memory limit reached" error can occur
although the hard disk indicates that storage space is still available.
To store data permanently, select an external storage location such as a USB memory
device.
For details, see Chapter 5.1.7, "Protecting Data Using the Secure User Mode",
on page 43.
Suffix:
<n>
.
Window
Parameters:
<FileName> String containing the path,name and extension of the target file.
Example:
MMEM:STOR:PEAK 'test.dat'
Saves the current marker peak list in the file test.dat.
Manual operation: See "Export Peak List" on page 551
MMEMory:STORe<n>:SGRam <FileName>
MMEMory:STORe<n>:SPECtrogram <FileName>
This command exports spectrogram data to an ASCII file.
The file contains the data for every frame in the history buffer. The data corresponding
to a particular frame begins with information about the frame number and the time that
frame was recorded.
Note that, depending on the size of the history buffer, the process of exporting the data
can take a while.
Managing Settings and Results

R&S FSW Series Specifications

General

Brand	R&S
Model	FSW Series
Category	Measuring Instruments
Language	English