EasyManua.ls Logo

R&S FSW Series - Amplifier; Analog Demodulation; Cdma2000 BTS

R&S FSW Series
1450 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Applications, Measurement Channels, and Operating Modes
R&S
®
FSW
119User Manual 1173.9411.02 ─ 43
For details see the R&S FSW-K144 and R&S FSW-K145 user manuals.
Remote command:
INST:SEL NR5G, see INSTrument[:SELect] on page 828
802.11ad
The 802.11ad application requires an instrument equipped with the 802.11ad option,
R&S FSW-K95. This application provides measurements and evaluations according to
the IEEE 802.11 ad standard.
For details see the R&S FSW-K95/-K97 User Manual.
Remote command:
INST:SEL WIGIG, see INSTrument[:SELect] on page 828
802.11ay
The 802.11ay application requires an instrument equipped with the 802.11ay option,
R&S FSW-K97. This application provides measurements and evaluations according to
the IEEE 802.11 ay standard.
For details see the R&S FSW-K95/-K97 User Manual.
Remote command:
INST:SEL EDMG, see INSTrument[:SELect] on page 828
Amplifier
The Amplifier Measurement application requires an instrument equipped with the
Amplifier Measurement option R&S FSW-K18. This application provides measure-
ments to measure the efficiency of traditional amplifiers and amplifiers that support
envelope tracking with the R&S FSW.
Also available is option R&S FSW-K18D, which provides direct DPD functionality.
For details see the R&S FSW-K18 User Manual (also contains information about
R&S FSW-K18D.
Remote command:
INST:SEL AMPL, see INSTrument[:SELect] on page 828
Analog Demodulation
The Analog Demodulation application requires an instrument equipped with the corre-
sponding optional software. This application provides measurement functions for
demodulating AM, FM, or PM signals.
For details see the R&S FSW-K7 User Manual.
Remote command:
INST:SEL ADEM, see INSTrument[:SELect] on page 828
cdma2000 BTS
The cdma2000 BTS application requires an instrument equipped with the cdma2000
BTS Measurements option, R&S FSW-K82. This application provides test measure-
ments for cdma2000 BTS downlink signals (base station signals) according to the test
specification.
For details see the R&S FSW-K82/-K83 User Manual.
For details see the R&S FSW-K82 User Manual.
Available Applications

Table of Contents

Related product manuals