To Next Page

To Previous Page

Common Analysis and Display Functions

R&S

FSW

531User Manual 1173.9411.02 ─ 43

CALCulate<n>:DELTamarker<m>:MAXimum:NEXT on page 1166

CALCulate<n>:DELTamarker<m>:MAXimum:RIGHt on page 1166

CALCulate<n>:DELTamarker<m>:MAXimum:LEFT on page 1166

Search Minimum

Sets the selected marker/delta marker to the minimum of the trace. If no marker is

active, marker 1 is activated.

For spectrogram displays, define which frame the minimum is to be searched in.

Remote command:

CALCulate<n>:MARKer<m>:MINimum[:PEAK] on page 1165

CALCulate<n>:DELTamarker<m>:MINimum[:PEAK] on page 1167

Search Next Minimum

Sets the selected marker/delta marker to the next (higher) minimum of the selected

trace. If no marker is active, marker 1 is activated.

For spectrogram displays, define which frame the next minimum is to be searched in.

Remote command:

CALCulate<n>:MARKer<m>:MINimum:NEXT on page 1165

CALCulate<n>:MARKer<m>:MINimum:LEFT on page 1164

CALCulate<n>:MARKer<m>:MINimum:RIGHt on page 1165

CALCulate<n>:DELTamarker<m>:MINimum:NEXT on page 1167

CALCulate<n>:DELTamarker<m>:MINimum:LEFT on page 1167

CALCulate<n>:DELTamarker<m>:MINimum:RIGHt on page 1168

Center Frequency = Marker Frequency

Sets the center frequency to the selected marker or delta marker frequency. A peak

can thus be set as center frequency, for example to analyze it in detail with a smaller

span.

This function is not available for zero span measurements.

Remote command:

CALCulate<n>:MARKer<m>:FUNCtion:CENTer on page 1024

Reference Level = Marker Level

Sets the reference level to the selected marker level.

Remote command:

CALCulate<n>:MARKer<m>:FUNCtion:REFerence on page 1039

9.3.4 Marker (Measurement) Functions

Access: "Overview" > "Analysis" > "Marker Functions"

Marker Usage

R&S FSW Series User Manual

Questions and Answers: