Applications, Measurement Channels, and Operating Modes
R&S
®
FSW
118User Manual 1173.9411.02 ─ 43
Remote command:
INST:SEL SAN, see INSTrument[:SELect] on page 828
1xEV-DO BTS
The 1xEV-DO BTS application requires an instrument equipped with the 1xEV-DO BTS
Measurements option, R&S FSW-K84. This application provides test measurements
for 1xEV-DO BTS downlink signals (base station signals) according to the test specifi-
cation.
For details see the R&S FSW-K84/-K85 User Manual.
For details see the R&S FSW-K84 User Manual.
Remote command:
INST:SEL BDO, see INSTrument[:SELect] on page 828
1xEV-DO MS
The 1xEV-DO MS application requires an instrument equipped with the 1xEV-DO MS
Measurements option, R&S FSW-K85. This application provides test measurements
for 1xEV-DO MS uplink signals (mobile signals) according to the test specification.
For details see the R&S FSW-K84/-K85 User Manual.
Remote command:
INST:SEL MDO, see INSTrument[:SELect] on page 828
3G FDD BTS
The 3G FDD BTS application requires an instrument equipped with the 3GPP Base
Station Measurements option, R&S FSW-K72. This application provides test measure-
ments for W-CDMA downlink signals (base station signals) according to the test speci-
fication.
For details see the R&S FSW-K72/-K73 User Manual.
For details see the R&S FSW-K72 User Manual.
Remote command:
INST:SEL BWCD, see INSTrument[:SELect] on page 828
3G FDD UE
The 3G FDD UE application requires an instrument equipped with the 3GPP User
Equipment Measurements option, R&S FSW-K73. This application provides test mea-
surements for W-CDMA uplink signals (mobile signals) according to the test specifica-
tion.
For details see the R&S FSW-K72/-K73 User Manual.
Remote command:
INST:SEL MWCD, see INSTrument[:SELect] on page 828
5G NR
The 5G NR application requires an instrument equipped with one of the 5G NR Mea-
surements options.
The R&S FSW-K144 application provides 5G NR measurements on the downlink.
The R&S FSW-K145 application provides 5G NR measurements on the uplink.
Available Applications