To Next Page

To Previous Page

Remote Commands

R&S

FSW

828User Manual 1173.9411.02 ─ 43

Setting parameters:

<ChannelName1> String containing the name of the channel you want to rename.

<ChannelName2> String containing the new channel name.

Note that you cannot assign an existing channel name to a new

channel; this will cause an error.

Channel names can have a maximum of 31 characters, and

must be compatible with the Windows conventions for file

names. In particular, they must not contain special characters

such as ":", "*", "?".

Example:

INST:REN 'IQAnalyzer2','IQAnalyzer3'

Renames the channel with the name 'IQAnalyzer2' to 'IQAna-

lyzer3'.

Usage: Setting only

Manual operation: See "Changing the Channel Name" on page 87

INSTrument[:SELect] <ChannelType> | <ChannelName>

This command activates a new channel with the defined channel type, or selects an

existing channel with the specified name.

Also see

●

INSTrument:CREate[:NEW] on page 824

●

Chapter 14.4.3, "Programming Example: Performing a Sequence of Measure-

ments", on page 831

Parameters:

<ChannelType> Channel type of the new channel.

For a list of available channel types see INSTrument:LIST?

on page 825.

<ChannelName> String containing the name of the channel.

Example:

INST IQ

Activates a channel for the I/Q Analyzer application (evaluation

mode).

INST 'MyIQSpectrum'

Selects the channel named 'MyIQSpectrum' (for example before

executing further commands for that channel).

Selecting the Operating Mode and Application

R&S FSW Series User Manual

Questions and Answers: