R&S FSW Series - Noise Figure; Oneweb; Phase Noise; Pulse Measurements

Applications, Measurement Channels, and Operating Modes
R&S
®
FSW
121User Manual 1173.9411.02 ─ 43
Remote command:
INST:SEL NIOT, see INSTrument[:SELect] on page 828
Noise Figure
The Noise Figure application requires an instrument equipped with the Noise Figure
Measurements option R&S FSW-K30. This application provides noise figure measure-
ments.
For details see the R&S FSW-K30 User Manual.
Remote command:
INST:SEL NOISE, see INSTrument[:SELect] on page 828
OneWeb
The OneWeb application requires an instrument equipped with the OneWeb measure-
ments option R&S FSW-K201. This application provides OneWeb reverse link mea-
surements.
For details see the R&S FSW-K201 (OneWeb Reverse Link Measurements) User Man-
ual.
Remote command:
INST:SEL OWEB, see INSTrument[:SELect] on page 828
Phase Noise
The Phase Noise application requires an instrument equipped with the Phase Noise
Measurements option, R&S FSW-K40. This application provides measurements for
phase noise tests.
For details see the R&S FSW-K40 User Manual.
Remote command:
INST:SEL PNOISE, see INSTrument[:SELect] on page 828
Pulse Measurements
The Pulse application requires an instrument equipped with the Pulse Measurements
option, R&S FSW-K6. This application provides measurement functions for pulsed sig-
nals.
For details see the R&S FSW-K6 User Manual.
Remote command:
INST:SEL PULSE, see INSTrument[:SELect] on page 828
Real-Time Spectrum
The Real-Time Spectrum application requires an instrument equipped with the Real-
Time Spectrum option, (R&S FSW-B160R/-K160RE/-U160R). This application provides
real-time measurement functions.
For details see the R&S FSW Real-Time User Manual.
Remote command:
INST:SEL RTIM, see INSTrument[:SELect] on page 828
Available Applications