General Instrument Setup
R&S
®
FSW
704User Manual 1173.9411.02 ─ 43
12.6.2 Information on Versions and Options
Access: [Setup] > "System Configuration" > "Versions + Options"
Information on the firmware version and options installed on your instrument is provi-
ded. The unique Rohde & Schwarz device ID is also indicated here, as it is required for
license and option administration.
You can also install new firmware options in this dialog box.
The table also contains:
●
The open source acknowledgements (PDF file) for the firmware and other software
packages used by the R&S FSW
Installing options in secure user mode
Be sure to install any new options before SecureUser Mode is enabled; see Chap-
ter 5.1.7, "Protecting Data Using the Secure User Mode", on page 43.
For restricted users in secure user mode, this function is not available!
Expired option licenses
If an option is about to expire, a message box is displayed to inform you. You can then
use the "Install Option" function to enter a new license key.
If an option has already expired, a message box appears for you to confirm. In this
case, all instrument functions are unavailable (including remote control) until the
R&S FSW is rebooted. You must then use the "Install Option" function to enter the new
license key.
System Configuration Settings
To Next Page
Loading...
Need help?
General
