Applications, Measurement Channels, and Operating Modes
R&S
®
FSW
123User Manual 1173.9411.02 ─ 43
Vector Signal Analysis (VSA)
The VSA application requires an instrument equipped with the Vector Signal Analysis
option, R&S FSW-K70. This application provides measurements and evaluations for
single-carrier digitally modulated signals.
For details see the R&S FSW-K70 User Manual.
Remote command:
INST:SEL DDEM, see INSTrument[:SELect] on page 828
WLAN
The WLAN application requires an instrument equipped with the WLAN option,
R&S FSW-K91/91n. This application provides measurements and evaluations accord-
ing to the WLAN IEEE 802.11 standards.
For details see the R&S FSW-K91 User Manual.
Remote command:
INST:SEL WLAN, see INSTrument[:SELect] on page 828
DOCSIS 3.1
The DOCSIS 3.1 application requires an instrument equipped with the DOCSIS 3.1
option, R&S FSW-K192. This application provides measurements and evaluations
according to the DOCSIS 3.1 standard.
For details see the R&S FSW-K192 User Manual.
Remote command:
INST:SEL DOCS, see INSTrument[:SELect] on page 828
6.2 R&S MultiView
Each application is displayed in a separate tab. An additional tab ("MultiView") provides
an overview of all currently active channels at a glance. In the "MultiView" tab, each
individual window contains its own channel bar with an additional button. Select this
button to switch to the corresponding channel display quickly.
R&S MultiView
To Next Page
Loading...
