R&S FSW Series - TOI Configuration

Measurements and Results
R&S
®
FSW
324User Manual 1173.9411.02 ─ 43
Remote command
The TOI can also be queried using the remote command CALCulate<n>:
MARKer<m>:FUNCtion:TOI:RESult? on page 992.
7.11.4 TOI Configuration
Access: "Overview" > "Select Measurement" > "Third Order Intercept" > "TOI Config"
The remote commands required to perform these tasks are described in Chap-
ter 14.5.12, "Measuring the Third Order Intercept Point", on page 990.
Marker 1/Marker 2/Marker 3/Marker 4........................................................................ 324
Search Signals............................................................................................................325
Marker 1/Marker 2/Marker 3/Marker 4
Indicates the detected characteristic values as determined by the TOI measurement
(see Chapter 7.11.3, "TOI Results", on page 323).
Third Order Intercept (TOI) Measurement