EasyManua.ls Logo

R&S FSW Series - Working with Transducers

R&S FSW Series
1450 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Remote Commands
R&S
®
FSW
1267User Manual 1173.9411.02 ─ 43
DIAGnostic:SERVice:STESt:RESult?
This command queries the self-test results.
Return values:
<Results> String of data containing the results.
The rows of the self-test result table are separated by commas.
Example:
DIAG:SERV:STES:RES?
would return, e.g.
"Total Selftest Status:
PASSED", "Date (dd/mm/yyyy): 09/07/2004 TIME:
16:24:54", "Runtime: 00:06", "...
Usage: Query only
SOURce<si>:TEMPerature:FRONtend
This command queries the current frontend temperature of the R&S FSW.
During self-alignment, the instrument's (frontend) temperature is also measured (as
soon as the instrument has warmed up completely). This temperature is used as a ref-
erence for a continuous temperature check during operation. If the current temperature
deviates from the stored self-alignment temperature by a certain degree, a warning is
displayed in the status bar indicating the resulting deviation in the measured power lev-
els. A status bit in the STATUs:QUEStionable:TEMPerature register indicates a
possible deviation.
Suffix:
<si>
.
irrelevant
Return values:
<Temperature> Temperature in degrees Celsius.
Example:
SOUR:TEMP:FRON?
Queries the temperature of the frontend sensor.
14.10.3 Working with Transducers
The following commands configure and control transducer factors.
Useful commands for transducer management described elsewhere
MMEMory:SELect[:ITEM]:TRANsducer:ALL on page 1237
Remote commands exclusive to transducer management
[SENSe:]CORRection:TRANsducer:ADJust:RLEVel[:STATe]............................................ 1268
[SENSe:]CORRection:TRANsducer:CATalog?.................................................................1268
[SENSe:]CORRection:TRANsducer:COMMent................................................................1269
[SENSe:]CORRection:TRANsducer:DATA...................................................................... 1269
[SENSe:]CORRection:TRANsducer:DELete....................................................................1269
[SENSe:]CORRection:TRANsducer:SCALing..................................................................1269
Configuring the R&S
FSW

Table of Contents

Related product manuals