R&S FSW Series - AM Modulation Depth Configuration

Measurements and Results
R&S
®
FSW
329User Manual 1173.9411.02 ─ 43
Remote command:
The AM modulation depth can also be queried using the remote command
CALCulate<n>:MARKer<m>:FUNCtion:MDEPth:RESult<t>? on page 994.
7.12.3 AM Modulation Depth Configuration
Access: "Overview" > "Select Measurement" > "AM Modulation Depth" > "AM Mod
Depth Config"
The remote commands required to perform these tasks are described in Chap-
ter 14.5.13, "Measuring the AM Modulation Depth", on page 993.
Marker 1/Marker 2/Marker 3........................................................................................329
Search Signals............................................................................................................330
Marker 1/Marker 2/Marker 3
Indicates the detected characteristic values as determined by the AM Modulation
Depth measurement:
AM Modulation Depth Measurement