R&S FSW Series - Storing and Loading Instrument Settings

Remote Commands
R&S
®
FSW
1237User Manual 1173.9411.02 ─ 43
MMEMory:SELect:CHANnel[:ITEM]:TRANsducer:ALL <State>
MMEMory:SELect[:ITEM]:TRANsducer:ALL <arg0>
This command includes or excludes transducer factors when storing or loading a con-
figuration file.
Parameters:
<arg0> ON | OFF | 1 | 0
*RST: 0
Example:
MMEM:SEL:TRAN:ALL ON
Manual operation: See "Items:" on page 631
See "Save" on page 682
14.9.3 Storing and Loading Instrument Settings
See also:
●
INSTrument[:SELect] on page 828 to select the channel.
MMEMory:CLEar:ALL...................................................................................................1237
MMEMory:CLEar:STATe............................................................................................... 1237
MMEMory:LOAD:AUTO................................................................................................1238
MMEMory:LOAD:STATe................................................................................................1238
MMEMory:LOAD:TYPE................................................................................................ 1239
MMEMory:STORe<1|2>:STATe..................................................................................... 1240
MMEMory:STORe<1|2>:STATe:NEXT............................................................................1240
MMEMory:STORe<1|2>:TYPE...................................................................................... 1241
SYSTem:PRESet......................................................................................................... 1241
SYSTem:PRESet:CHANnel[:EXEC]............................................................................... 1242
MMEMory:CLEar:ALL
This command deletes all instrument configuration files in the current directory.
You can select the directory with MMEMory:CDIRectory on page 1230.
Example:
MMEM:CLE:ALL
MMEMory:CLEar:STATe <arg0>, <arg1>
This command deletes an instrument configuration file.
Parameters:
<arg0>
<arg1> String containing the path and name of the file to delete.
The string may or may not contain the file's extension.
Example:
MMEM:CLE:STAT 1,'TEST'
Managing Settings and Results