R&S FSW Series - Selected MarkerMarker State; Marker Position X-Value; Marker State; Selected Marker

Measurements and Results
R&S
®
FSW
343User Manual 1173.9411.02 ─ 43
Selected Marker..........................................................................................................343
Marker State................................................................................................................343
Marker Position X-value..............................................................................................343
Marker Type................................................................................................................ 344
Reference Marker....................................................................................................... 344
Linking to Another Marker...........................................................................................344
Assigning the Marker to a Trace................................................................................. 344
Final Test Detector...................................................................................................... 345
Select Marker..............................................................................................................345
Selected Marker
Marker name. The marker which is currently selected for editing is highlighted orange.
Remote command:
Marker selected via suffix <m> in remote commands.
Marker State
Activates or deactivates the marker in the diagram.
Remote command:
CALCulate<n>:MARKer<m>[:STATe] on page 1155
CALCulate<n>:DELTamarker<m>[:STATe] on page 1153
Marker Position X-value
Defines the position (x-value) of the marker in the diagram. For normal markers, the
absolute position is indicated. For delta markers, the position relative to the reference
marker is provided.
Remote command:
CALCulate<n>:MARKer<m>:X on page 1156
CALCulate<n>:DELTamarker<m>:X on page 1154
Electromagnetic Interference (EMI) Measurement