R&S FSW Series User Manual

General Instrument Setup
R&S
®
FSW
722User Manual 1173.9411.02 ─ 43
"AC DC Coupling"
Synchronizes the Input Coupling
Remote command:
INSTrument:COUPle:ACDC on page 1312
"Impedance"
Synchronizes the impedance for RF input
Remote command:
INSTrument:COUPle:IMPedance on page 1314
"Analog Baseband Impedance"
Synchronizes the impedance for analog baseband input
Remote command:
INSTrument:COUPle:ABIMpedance on page 1311
Selecting all or no coupling mechanisms
Select all items available in the general coupling manager using the "Enable All Items"
button.
Note that you cannot actually select all items, because some of them are mutually
exclusive.
Deselect all items available in the coupling manager using the "Disable All Items" but-
ton.
Remote command:
not supported
Restoring the default configuration
You can restore the default parameter coupling configuration any time with the "Default
Config" button.
Remote command:
not supported
12.8.2 User-Defined Parameter Coupling
Access: [SETUP] > "Parameter Coupling" > "User Coupling"
User couplings allow you to synchronize user-defined parameters, as well as markers
and lines, between measurement channels.
Compared to the predefined couplings, user couplings do not necessarily have to syn-
chronize all active measurement channels. Instead you can define specific channels
that are synchronized with each other, in any combination, while other channels remain
independent.
Synchronizing Measurement Channel Configuration

R&S FSW Series Specifications

General

Brand	R&S
Model	FSW Series
Category	Measuring Instruments
Language	English