R&S FSW Series User Manual

Network and Remote Operation
R&S
®
FSW
779User Manual 1173.9411.02 ─ 43
Remote command:
CONFigure:GENerator:IPConnection:ADDRess on page 1308
123/ABC ← IP Address or Computer name of Signal Generator ← Settings
By default, the TCPIP address is expected. To enter the computer name, toggle the
"123"/"ABC" button to "ABC".
Password ← IP Address or Computer name of Signal Generator ← Settings
Enter the password required to operate the connected signal generator.
Test Connection ← Settings
The R&S FSW attempts to establish a connection to the signal generator.
If an instrument is connected, the following information is displayed:
●
Device type
●
Name and serial number
●
Connection state
Remote command:
CONFigure:GENerator:CONNection:CSTate? on page 1307
CONFigure:GENerator:CONNection[:STATe] on page 1308
13.4.3 How to Determine the Required SCPI Command
The SCPI Recorder provides information on the required SCPI command for the avail-
able measurement settings, functions, and results in a context-sensitive menu.
1. Define the setting or navigate to the function you need the SCPI command for.
To find the query command for trace or marker results, select the result diagram.
2. On the screen, tap and hold, or right-click the measurement setting, function, or
result display.
The context-sensitive menu for that particular setting, function, or result is dis-
played.
Tip: If the SCPI command menu is not displayed, you probably tapped outside of a
softkey or input field, for example in a block diagram. Tap within the corresponding
softkey, button or input field, or in a result display, to display the context-sensitive
SCPI command menu.
3. Select "Show SCPI result query commands" or "Show SCPI command", depending
on which item you selected.
A dialog box with the required command and some functions is displayed.
If multiple commands are possible, for example to query different measurement
results, all possible commands are displayed.
4. To display the SCPI command dialog box for a query command, select the query
command you are interested in from the list.
Automating Tasks with Remote Command Scripts

R&S FSW Series Specifications

General

Brand	R&S
Model	FSW Series
Category	Measuring Instruments
Language	English