Remote Commands
R&S
®
FSW
1168User Manual 1173.9411.02 ─ 43
Manual operation: See "Search Minimum" on page 531
CALCulate<n>:DELTamarker<m>:MINimum:RIGHt
This command moves a delta marker to the next higher minimum value.
The search includes only measurement values to the right of the current marker posi-
tion.
In the spectrogram, the command moves a marker horizontally to the minimum level in
the currently selected frame. The vertical marker position remains the same.
Suffix:
<n>
.
Window
<m> Marker
Manual operation: See "Search Next Minimum" on page 531
14.8.3.5
Retrieving Marker Results
The following commands are used to retrieve the results of markers.
You can use the marker values to position the center frequency or reference level
directly using the following commands:
●
CALCulate<n>:MARKer<m>:FUNCtion:CENTer on page 1024
●
CALCulate<n>:MARKer<m>:FUNCtion:REFerence on page 1039
Useful commands for retrieving results described elsewhere:
●
CALCulate<n>:DELTamarker<m>:X on page 1154
●
CALCulate<n>:MARKer<m>:X on page 1156
●
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:COUNt? on page 1182
●
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:X? on page 1184
●
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:Y? on page 1184
●
CALCulate<n>:MARKer<m>:FUNCtion:NOISe:RESult? on page 1185
●
CALCulate<n>:DELTamarker<m>:FUNCtion:PNOise:RESult?
on page 1186
●
CALCulate<n>:DELTamarker<m>:FUNCtion:BPOWer:RESult?
on page 1191
●
CALCulate<n>:MARKer<m>:FUNCtion:BPOWer:RESult? on page 1189
●
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:RESult? on page 1194
●
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:FREQuency? on page 1193
●
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:QFACtor? on page 1194
●
CALCulate<n>:MARKer<m>:COUNt:FREQuency? on page 1196
Analyzing Measurements (Basics)