R&S FSW Series - Page 1169

Remote Commands
R&S
®
FSW
1169User Manual 1173.9411.02 ─ 43
Remote commands exclusive to retrieving marker results
CALCulate<n>:DELTamarker<m>:X:RELative?............................................................... 1169
CALCulate<n>:DELTamarker<m>:Y............................................................................... 1169
CALCulate<n>:MARKer<m>:Y.......................................................................................1169
CALCulate<n>:DELTamarker<m>:X:RELative?
This command queries the relative position of a delta marker on the x-axis.
If necessary, the command activates the delta marker first.
Suffix:
<n>
.
Window
<m> Marker
Return values:
<Position> Position of the delta marker in relation to the reference marker.
Example:
CALC:DELT3:X:REL?
Outputs the frequency of delta marker 3 relative to marker 1 or
relative to the reference position.
Usage: Query only
Manual operation: See "Marker 1/Marker 2/Marker 3/Marker 4" on page 324
See "Marker 1/Marker 2/Marker 3" on page 329
CALCulate<n>:DELTamarker<m>:Y
Queries the result at the position of the specified delta marker.
Suffix:
<n>
.
1..n
<m> 1..n
Return values:
<Result> Result at the position of the delta marker.
The unit is variable and depends on the one you have currently
set.
Default unit: DBM
CALCulate<n>:MARKer<m>:Y
Queries the result at the position of the specified marker.
Suffix:
<n>
.
1..n
<m> 1..n
Return values:
<Result> Default unit: DBM
Analyzing Measurements (Basics)