R&S FSW Series - Page 2

This manual applies to the following R&S
®
FSW models with firmware version 4.50 and later:
●
R&S
®
FSW8 (1331.5003K08 / 1312.8000K08)
●
R&S
®
FSW13 (1331.5003K13 / 1312.8000K13)
●
R&S
®
FSW26 (1331.5003K26 / 1312.8000K26)
●
R&S
®
FSW43 (1331.5003K43 / 1312.8000K43)
●
R&S
®
FSW50 (1331.5003K50 / 1312.8000K50)
●
R&S
®
FSW67 (1331.5003K67 / 1312.8000K67)
●
R&S
®
FSW85 (1331.5003K85 / 1312.8000K85)
In addition to the base unit, the following options are described:
●
R&S
®
FSW-B4, OCXO (1313.0703.02)
●
R&S
®
FSW-B10, external generator control (1313.1622.02)
●
R&S
®
FSW-B13, high-pass filter (1313.0761.02)
●
R&S
®
FSW-B21, external mixer (1313.1100.XX)
●
R&S
®
FSW-B24, preamplifier (1313.0832.XX)
●
R&S
®
FSW-B25, electronic attenuator (1313.0990.02)
●
R&S
®
FSW-B90G, frequency extension 90 GHz (1331.7693.02)
●
R&S
®
FSW-K19 Noise Power Ratio measurement (1331.8283.02)
●
R&S
®
FSW-K54 EMI measurements (1313.1400.02)
●
R&S
®
FSW-K544 frequency response correction (1338.2716.02)
© 2019 Rohde & Schwarz GmbH & Co. KG
Mühldorfstr. 15, 81671 München, Germany
Phone: +49 89 41 29 - 0
Fax: +49 89 41 29 12 164
Email: info@rohde-schwarz.com
Internet: www.rohde-schwarz.com
Subject to change – Data without tolerance limits is not binding.
R&S
®
is a registered trademark of Rohde & Schwarz GmbH & Co. KG.
Trade names are trademarks of the owners.
1173.9411.02 | Version 43 | R&S
®
FSW
The following abbreviations are used throughout this manual: R&S
®
FSW is abbreviated as R&S FSW. R&S MultiView is abbreviated
as MultiView. Products of the R&S
®
SMW family, e.g. R&S
®
SMW200A, are abbreviated as R&S SMW.