R&S FSW Series User Manual

Getting Started
R&S
®
FSW
41User Manual 1173.9411.02 ─ 43
5. Tap the entry named "Internet Protocol Version 4 (TCP/IPv4)" to highlight it.
6. Select the "Properties" button.
7. On the "General" tab, select "Use the following DNS server addresses" and enter
your own DNS addresses.
For more information, refer to the Windows operating system help.
5.1.5.3 Using Computer Names
In a LAN that uses a DNS server (Domain Name System server), each PC or instru-
ment connected in the LAN can be accessed via an unambiguous computer name
instead of the IP address. The DNS server translates the host name to the IP address.
This is especially useful when a DHCP server is used, as a new IP address may be
assigned each time the instrument is restarted.
Each instrument is delivered with an assigned computer name, but this name can be
changed.
The default instrument name is a non-case-sensitive string with the following syntax:
Preparing for Use

R&S FSW Series Specifications

General

Brand	R&S
Model	FSW Series
Category	Measuring Instruments
Language	English